These boots are made for walking, and that’s just what they’ll do! LOL Until of course, you take them off and they leave a mess on your floor. I showed you how to build this diy pull out under sink cabinet organizer for your kitchen, in a previous post. However, if you found that to be a difficult project you may want to try building this diy boot rack instead.
There are quite a few diy boot rack projects available on the internet. Personally I choose this one because of its simplicity. It should take you less than half an hour to have yours set up and ready to go. If you have a large family and tons of boots, you’ll probably have to make two or three of these. They don’t take up too much space and therefore are a great storage and organisation solution for any home.
-------------------------------------------------------------------
Here’s What You’ll Need:
- wood board
- hardwood dowels
- wood screws
- 1″ paddle bit
- electric drill
- rubber mallet
- skill saw or table saw
- tape measure
- pencil or marker
First order of business would be to measure your wood board and then cut it out as directed. Next you are going to cut the dowels, making sure they are long enough to hold most boot sizes. The dowels will need holes drilled at a 45 degree into the board, the paddle bit is the right accessory for this. All that is left to do is to tap in your dowels and then secure each one with a wooden screw from the back of the board. Voila, you’re done!
You can get full step by step instructions on the A Farm Girl In The Making blog, here…
You can watch the video below on DIY: How to Make a Super Simple Boot Rack…
You can watch the video below on STUPID EASY DIY Boot Shoe Rack…
You can watch the video below on Easy DIY Boot Rack…
